Saturday, August 3, 2019

Summit Driveway Profiles

SUMMIT DRIVEWAY SERVICES



Here is a look at some of the online profiles by Summit Driveways in Nuneaton. You can view our ratings, leave feedback or view some of our previous installations.




MAKE THE RIGHT CHOICE FOR YOUR PAVING TODAY

 



Depending on the type of paving and the pattern you are installing, you will need to either lay it staggered or in a herringbone pattern. We recommend having a line pulled from the 90 degree angle of whatever point you choose.

Lay the paving off the string line in a herringbone pattern and simply keep repeating it line by line until you have filled the area with block paving.

Bordering is normally done after this by going around the paving and adding it to the outside of the paving. We say normally, but sometimes if there will be vehicular traffic going to the edges of the border, we recommend setting them in before you screed the sand with concrete.

Lastly, cut the block paving with a diamond blade saw or a block splitter (you can hire both of these but if you are inexperienced, we recommend the block splitters for safety). Cut the gaps using a paving pencil or chalk stick to mark the paving exactly to fit the gap between the paving and the border.

Make sure if the block paving has not been in set in concrete and is not being retained by edging, to back up the borders with concrete to ensure it does not move.

Jointing of the block paving is preferably completed in dry periods. We apply kiln dried sand to the block paved area, then brush into the joints using a soft brush, ensuring the joints are filled fully.
You can compact the block paving with a vibrator plate. This is a machine which runs over paving and vibrates down, hard, in a small square area. This is more than strong enough for any type of block paving. For clay bricks, we recommend using a vibrator plate with a rubber mat to protect them.

Once you have compacted the block paving, you should top back up the paving joints with some more kiln dried sand and brush off the entire area.

We hope this helps you with your paving project and if you need any help, please don’t hesitate to get in touch with our Nuneaton paving team.
 



Here is a list of the service areas that you can avail of our driveway and patio services in throughout the Nuneaton, Bedworth, Hinckley and Rugby areas.













2 comments:

  1. Hello Summit driveways! Amazing Blog I must say. You are providing a wonderful driveways services & through this blog you are reflecting your work very well. Your readers would be pleased if you add some structure points to your Blog content. Thank You.

    ReplyDelete
  2. I admire this article for the well-researched content and excellent wording. I got so involved in this material that I couldn’t stop reading. I am impressed with your work and skill. Thank you so much. Regards,
    Driveway Surfacing Exeter

    ReplyDelete